The hedge trimmer Garland SET 762G-V24 is the ideal tool for those looking for precision and power in hedge and shrub maintenance. Its 22 cc 2-stroke Garland engine delivers 1.14 HP of power, guaranteeing optimum performance in every cut.
The metal gear transmission with gear reduction improves the cutting force, making it easier to work on thicker branches with less effort. Its 70 cm bar, with laser-sharpened triple-edged blades and a 28 mm tooth width, allows for clean and efficient cuts.
The 180° rotating handle provides great versatility, allowing you to work from different angles with total comfort. In addition, the anti-vibration system and ergonomic handle with double safety trigger make it safer and less tiring to use, even during long sessions.
| Motor type | Garland 2 T |
| Displacement | 22 cc |
| Power | 0.8 kW / 1.14 hp |
| Blade length | 700 mm |
| Width between teeth | 28 mm |
| Weight (empty) | 4.4 kg |
| Idle | 3000 min-¹ |
| Maximum revolutions | 7500 min-¹ |
| Torque | 1.1 Nm |
| Consumption | 0,612 kg/kWh |
| Autonomy | 45.51 min |
| Two-hand safety mechanism | No |
| Rotating handle | Yes / 180 |
| Clutch RPM | 4200 min-¹ |
| Cutting element RPM | 1800 min-¹ |
| Max. cutting diameter | 24 mm |
| Fuel tank capacity | 0,5 L |
| Average vibration level | 5 m/s² |
| Vibration uncertainty k | 1.5 m/s² |
| Sound pressure | 97.3 dB(A) |
| Uncertainty k | 3 dB(A) |
| Sound power (guaranteed/measured) | 109 dB(A) |
| Dimensions in use (L x W x H) | 122.5 x 23 x 22 cm |
| Packed weight | 6 kg |
| Packing dimensions (L x W x H) | 14 x 27 x 110 cm |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
- Battery and charger not included
Battery and charger not included
