The Electric branch shredder Garland Chipper 780 QG-V23 It features an electric motor. This provides us with a total power of 4300 W and a displacement of 212 cc.
The branch shredder model offers us a Maximum engine speed of 3600 min-1 and it has a crushing diameter of 6 cm. This shredder model features a lightweight design, weighing only 50 kg.
Basic axial roller shredder ideal for small domestic shredding tasks. Its shredding system is effective even with palm leaves.
Small-sized motor, the transport wheels and its handle allow for easy movement. It features a swivel nozzle and an emergency stop button.
Allows the shredding of branches up to 6 cm maximum diameter, depending on the hardness of the wood. With an adjustable deflector to regulate the discharge distance of the shredded material.
| Engine Type | Garland 4 T |
| Displacement | 212 cc |
| Power | 4.3 kW |
| Hopper without tools. | No |
| Type of cut | 2 opposing blades on a rotor |
| Wide work | 60 mm |
| Transport wheel | Yes |
| Empty machine weight | 50 kg |
| Maximum engine revolutions | 3600 min-1 |
| Consumption | 0.395 kg/kWh |
| Autonomy | 86.48 min |
| Hopper expulsion without tools | No |
| Directional expulsion | No |
| Carrying handle | Yes |
| Tow hook | No |
| Admission system | Manual |
| Number of hoppers | 1 |
| Grid | Yes |
| Fuel tank capacity. | 3.6 l |
| Oil change volume | 0.6 l |
| Type of engine oil | 10W-40 |
| Sound pressure | 92.2 dB (A) |
| Constant uncertainty k | 2.5 dB (A) |
| Sound power (guaranteed/measured) | 116 dB (A) |
| For | 12.5 Nm |
| IMPORTANT NOTICE |
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
Before transporting this machine, always remove the plug from the power socket. Always transport the machine with the motor turned off.
Please take into account the weight of the device if you are going to lift it. Check the machine's technical specifications for its weight. To lift the device, lift it by the handle.
To transport the device, use its wheels. Hold the device by the handle and pull it.
If you are going to transport the device in vehicles, secure it firmly to prevent it from sliding or tipping over.
Store inactive power tools in a place that is not accessible to children and is safe so that it does not endanger anyone. The machine that is out of use should be stored clean, on a flat surface. Store the machine in a place
where the temperature range is not lower than 0ºC nor higher than 45ºC.
Unplug the power plug from the power Supply Before storing this machine, clean all the parts and store the machine in a safe and dry place.
Always follow the maintenance chapter guidelines before storing the machine.
Data sheet
Specific References
