Unified reduction for DELEKS power take-off
- Unified reduction for DELEKS power take-offs
€50.50 VAT incl.
GEARBOX INCLUDED
Deleks products take about 15 to 30 days. |
The PTO Deleks BUGGY-100C 970 mm chain brushcutter is one of the ideal solution for areas with branches and bushes or even areas with stones, this brushcutter is made for tractors with power from 25 to 75 HP, has a reversible use, where you reverse the 3-point hitch and its multiplier.
It has 2 hardened steel chains of grade 80 mm. 10 x 30, it has a minimum width that also allows cutting close to the edges. Thanks to its reversible use, it can be used in front of the tractor.
It has skids to regulate the cutting height and an extremely robust chassis that makes it a very useful machine with a long life span.
Working width | 970.0 mm |
Total width | 1070.0 mm |
Cutting height min/max | 10 - 60 mm |
Weight | 100.0 kg |
Total height | 650 mm |
Tractor power | 25-75 hp |
3-point hitch | Cat. 1 (ø 19.0-22.0mm) |
Distance between lower points | 450-720 mm |
Total length | 1100.0 mm |
Space between ground and transmission box | 340 mm |
Plate thickness | 3 mm |
Transmission type | Gears |
Transmission: Gearbox | Lombarda Ingranaggi Srl (Italy) (Warranty 3 years) |
Transmission: PTO | 540 r/min |
Transmission: rotation direction | Schedule |
Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
Cardan | CE 4x1000 mm with freewheel |
Packing dimensions | 107 x 110 x 60 cm |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
Cardan shaft included