Branch shredder for tractor Deleks DK-1300
The Deleks DK-1300 mulcher is a tractor attachment that is specially designed for tractors with power between 18-50HP. In addition, this mulcher is also equipped with a 4x800 mm CE cardan shaft + pin.
The DK-1300 mulcher model from Deleks provides a good cutting system. It has a drum with two knives and 8 hammers. It also offers an ejection height of 1550 mm.
This shredder Deleks is ideal for shredding a wide variety of dry and green wood with a diameter of 10cm. The ejected residues measure between 1 and 2 cm, this ensures a good combustion. It is suitable for all CAT1 tractors with 3-point hitch.
The DK-1300 model is equipped with a roller at power Supply to facilitate the insertion of the branches. The roller is controlled by operating the safety control. The direction of rotation of the roller can be simply stopped or reversed.
This machine from Deleks includes an internal disc with 2 knives and two rows of hammers. It has a manual adjustment valve to adjust the speed of the pinch roller. In this model the output can be oriented 360 degrees.
The Deleks DK-1300 mulcher also comes with a locking handle and immediate transmission overhaul. The model has hoppers that close for road transport. Closed it measures 1150 mm.
This model of the DK-1300 mulcher guarantees the operator great ease and comfort to perform a good shredding. This is thanks to its remarkable good features. The model has a light weight of 225 kg.
Among these features we can highlight its efficiency of 8-9 m3/h and its good PTO speed of 1000 r/min. In addition, it also offers a STOP & START lever safety system.
Features
| Weight |
225 kg |
| Tractor power |
18 - 50 hp |
| 3-point hitch |
Cat. 1 (ø 19-22mm) |
| Transmission |
Hydraulic system |
| Ground clearance between gearbox and ground |
500 mm |
| Cardan shaft |
CE 4x800 mm + Pin |
| Efficiency |
8-9 m3/h |
| Cutting system |
Drum with 2 blades + 8 hammers |
| Size of chips |
5 - 10 mm |
| PTO speed |
1000 r/min |
| No. of transmission cores |
x |
| Safety system |
STOP & START lever |
| Roll: number |
1 |
| Roll: width |
150 mm |
| Roll: transmission |
Hydraulic |
| Output dimensions |
360° |
| Maximum cutting diameter |
80 - 100 mm |
| Ejection height |
1550 mm |
| Packing dimensions |
1250*110*2200 mm |
| IMPORTANT NOTICE |
|
| It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
