Unified reduction for DELEKS power take-off
- Unified reduction for DELEKS power take-offs
€50.50 VAT incl.
CARDAN SHAFT INCLUDED
Deleks products take about 15 to 30 days. |
The DK1800 disc shredder Deleks is designed to grind a wide variety of dry and green wood, with a maximum diameter 10-13cm. The expelled residues measure between 1 and 2cm, this ensures good combustion in, for example, wood stoves.
Model DK1800 is operated by a gimbal connected to the tractor.Los rollers of power Supply are operated by a mechanical control that allows to stop or change the backward direction of rotation. It is also possible to regulate the speed of rotation of the rollers of power Supply depending on the type of wood to be shredded.
It is suitable for all CAT 1-2 tractors, with 3-point hitch such as Fiat, Lamborghini Crono, Kubota L, Antonio Carraro Tigrone, Goldoni Star, New Holland T3F, T4F, Landini Mistral, Rex, Valpadana, etc. CE conformity. Warranty 2 years. Machine not suitable for shredding corn, straw, alfalfa, etc
Overall width | 1250.0 mm |
Weight | 445.0 kg |
Total height | 1740.0 - 1890.0 mm |
Tractor power | 30 - 90 hp |
3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm |
Distance between the lower points | 450.0 - 780.0 mm |
Total length | 2000.0 mm |
Slats: Weight | 450.0 g |
Transmission | Koreas V |
Gearbox to ground clearance | 600.0 - 750.0 mm |
Cardan | CE 4x800 mm |
Efficiency | 10-13 m3/h |
Cutting system | Disc with 4 slats + 1 counter slat |
Measurement of chips | 5.0 - 15.0 mm |
PTO speed | 540 r/min |
No. of Koreas transmission | 2 |
Measurement of the Koreas | A737 |
Safety system | STOP & START lever |
Slats: measurement | 160.0*55.0*8.0 mm |
Roll: number | 2 |
Roll: width | 220.0 mm |
Roll: transmission | Hydraulics |
Working height | 450.0 - 600.0 mm |
Working width | 900.0 mm |
Output measures | 114.0*114.0 mm / 360° |
Maximum cutting diameter | 100.0 - 130.0 mm |
Roll: sheet thickness | 5.0 mm |
Roll: diameter | 140.0 mm |
Ejection height | 1850.0 mm |
Packing dimensions | 1600.0*1150.0*1500.0 mm |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
CARDAN SHAFT INCLUDED