Pack of 2 titanium replacement chains ANOVA
- Chain width : .325" - .325"
- Gauge : .058" - 1,5
- Tooth type : Square
- Links : 72
€55.66 VAT incl.
Deleks products take about 15 to 25 days. |
Shredder, 100cm blade mulcher for mini excavator - DELEKS® - Made in Italy - For brambles, shrubs, ditches - 2-year warranty.
Hydraulic brush cutter for mini excavator 1.0-2.0 ton. For brambles, bushes, ditches, banks, embankments, branches.
Mini excavator brands: Caterpillar, Takeuchi, Kubota, JCB, Case, Komatsu, Kubota, Yanmar, etc.
Hitch measurements: see images (alternatively, we can create a custom hitch based on a drawing, with additional production costs).
FEATURES AND ADVANTAGES
Structure made entirely of Swedish SSAB steel.
Rotor manufactured with THYSSENKRUPP tube, electronically balanced, made of S355 steel with a thickness of 8mm.
Rotor tube turned along its entire length to ensure maximum linearity.
SHammer supports in HARDOX.
Caproni gear hydraulic motor, features and advantages:
Specifically designed for crusher heads Deleks.
Two-tube one-directional (does not require the third drainage tube).
Equipped with a support bearing on the drive shaft.
Reinforced oil seal.
Integrated maximum pressure valve
Technical data and attached drawings.
Operator machine requirements for operation:
It is preferable to have a double pump:
1 for the base of tracked
1 for the services (pump of 20-22 l/min)
Documentation delivered with the machine:
Invoice or tax receipt
CE compliance
User manual
Working width | 1000.0 mm |
Total width | 1300.0 mm |
Minimum/maximum cutting height | 20.0 - 80.0 mm |
Weight | 100.0 kg |
Height of the hood | 340.0 mm |
Maximum cutting diameter | 20.0 mm |
Thickness of the sheet | 5.0 mm |
Transmission: rotor speed | 1500 rpm (revolutions per minute) |
Rotor: diameter | 76.0 mm |
Rotor: type of bearings and dimension | SKF 6207 + SKF UCF206 |
Rotor: balancing | Electronic |
Rotor: blade thickness | 8.0 mm |
Roll: diameter | 102.0 mm |
Roll: sheet thickness | 5.0 mm |
Roll: type of bearings and dimension | UCFL205 |
Oil pressure min./max. | 5 - 8 bar |
Optimal oil flow | 20 - 22 l/min |
Maximal pressure | 200 bar |
Length of the hood | 520.0 mm |
Number of slats | 48 |
Lamas: Weight | 130.0 g |
Lamas: ø hole | 13.0 mm |
Cucillos: base width | 50.0 mm |
Cucillos: diagonal | 85.0 mm |
Packaging dimension | 1300.0*600.0*500.0 mm |
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.