Snow plow for tractor Deleks LNV-300-C 60-90HP
- Tractor power: 60 - 90 HP
- Blade width: 3020 mm
- Blade height: 920 mm
- Inclination: 30 degrees
€3,064.91 VAT incl.
The Polidozer Snowplow Garto PQG, has 12 models where these vary in some characteristics, this polidozer has a standard snowplow blade that has a high performance double hydraulic cylinder system that generates a working angle of 30 degrees in both directions.
It has a hydraulic cylinder of 16 Mpa, the height of this polidozer with rubber, is 650 mm, the length of this is 700 mm (depending on the model) and has a height of 680 mm, this makes it an effective tool when using it and according to its model we can choose the one that best suits our needs.
It has different variants according to its attachment.
Model | PQG150 | PQG200 | PQG250 | PQG300 |
Width | 1500 mm | 2000 mm | 2250 mm | 3000 mm |
Width -30 degrees inclination | 1.300 mm | 1.700 mm | 2.150 mm | 2.600 mm |
Weight | 114 kg | 135 kg | 155 kg | 178 kg |
Power requirement | 22 - 40 HP | 30 - 70 HP | 35 - 75 HP | 40 - 90 HP |
Model | PQG150 | PQG200 | PQG250 | PQG300 |
Width | 1500 mm | 2000 mm | 2250 mm | 3000 mm |
Weight | 115.5 kg | 137.5 kg | 156,5 kg | 180.5 kg |
Power requirement | 22 - 40 HP | 30 - 70 HP | 35 - 75 HP | 40 - 90 HP |
Model | PQG150 | PQG200 | PQG250 | PQG300 |
Width | 1500 mm | 2000 mm | 2250 mm | 3000 mm |
Weight | 114 kg | 136 kg | 155 kg | 179 kg |
Power requirement | 22 - 40 HP | 30 - 70 HP | 35 - 75 HP | 40 - 90 HP |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |