DELEKS PRI-H hydraulic rear blade for tractor
Rating:
(0)
- Load capacity: 700 kg
- 2 hydraulic cylinders
- Tractor power: 40 - 90 HP
- Shovel width: 1400 - 2000 mm
| Deleks products take about 15 to 20 days. |
close
DELEKS PRI-H hydraulic rear blade for tractor
€1,208.12
Hydraulic rear loader for DELEKS PRI-H tractor
DELEKS PRI-H Hydraulic Rear Tractor Loader for Tractor is a shovel designed in reinforced steel in order to be able to load and transport all types of materials, such as earth, sand or even snow. It can also be used for digging and leveling a site. This model is equipped with hydraulic balancing of the shovel.
This shovel is suitable for tractors from 40 to 90 HP depending on the model. It has a 700 kg load capacity, thanks to its hydraulic cylinder, the shovel can be tilted and kept tilted in all positions, allowing it to be used as a shovel or as a leveling blade.
Your the loading blade is made of stainless steel and has a thickness of 10 mm and a cutting edge, the new design of the shovel allows a good penetration and ensures a long service life. This shovel has been innovated with a new weight distribution: The shovel is lifted in the middle so that it is not necessary to lift it very high.
In this way, the materials are allowed to fall, which makes it possible to reduce the stress on the hydraulic cylinder. This makes work is simpler and shovel longevity is increased. The arms of the shovel do not exceed the width of the shovel, which allows for a better productivity and avoids proximity to possible obstacles.
It has a safety hinge pin to prevent unintentional dropping of materials. It has a possibility of increasing from 30% to 50% of the load volume of the shovel thanks to the rear door and the upper grill (optional purchase).
Features
| Model | PRI-140-H | PRI-160-H | PRI-180-H | PRI-200-H |
| Overall width | 1432.0 mm | 1620.0 mm | 1820.0 mm | 2020.0 mm |
| Weight | 178.50 kg | 198.50 kg | 238.0 kg | 263.0 kg |
| Total height | 935.0 mm | 935.0 mm | 935.0 mm | 935.0 mm |
| Tractor power | 40 - 90 hp | 50 - 90 hp | 50 - 90 hp | 60 - 90 hp |
| 3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) |
| Blade width | 1400.0 mm | 1600.0 mm | 1800.0 mm | 2000.0 mm |
| Load capacity | 700.0 Kg | |||
| Load volume | 0.39 m3 | 0,50 m3 | 0.56 m3 | 0.62 m3 |
| Thickness of sheet metal at tip | 10.0 mm | |||
| Blade plate thickness | 6.0 mm | |||
| Blade height | 440.0 mm | 520.0 mm | 520.0 mm | 520.0 mm |
| Depth | 800.0 mm | |||
| Total depth | 1000.0 mm | |||
| Plate thickness. 3-point hitch | 13.0 mm | |||
| Distance between lower points | 660.0 - 935.0 mm | |||
| Hydraulic hoses (2) | 1500.0 mm /1.2" AGRI, WP-400 bar | |||
| Hydraulic piston ø | 80.0/30.0 mm | |||
| Inclination | Hydraulics | |||
| Angle of inclination | 80° | |||
| Oil pressure min/max | 120 - 150 bar | |||
| Optimal oil flow | 18 - 22 l/min | |||
| Packing dimensions | 142 x 95 x 109 | 163 x 110 x 107 cm | 183 x 110 x 107 cm | 203 x 110 x 107 cm |
| IMPORTANT NOTICE |
| Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
2604248
Data sheet
- Working width PTO
- 1400 - 2000 mm
- Tractor power
- 40 - 90 HP
- Load capacity
- 700 kg
- 3-point hitch for tractor
- Yes
- Country of manufacture
- Italy
- Weight
- 178.5 - 263 kg
Specific References
- ean13
- 8053470230486
- mpn
- PRI140H
New
✔️ Advantages of making purchases in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Related Product
Forklift Hitches 140-160-180-200H DELEKS
- Forklift hitches 140-160-180-200H DELEKS
€291.31
Price
excl. VAT
€352.49 VAT incl.
€352.49 VAT incl.
PRI-140 160/180/200-H DELEKS mechanical kit
- Mechanical kit PRI-140 160/180/200-H DELEKS
€86.81
Price
excl. VAT
€105.04 VAT incl.
€105.04 VAT incl.
Promotions
Review
5 other products
- -4%
-4%
PTO Leveling Blade Deleks DL-170 20 - 45 HP
- Total width : 1700.0 mm
- Weight : 135.0 kg
- Total height : 1000.0 mm
€595.04
Regular price
€619.83
Price
excl. VAT
€719.99 VAT incl.
€719.99 VAT incl.
- -7%
-7%
Heavy hydraulic grader for Zeppelin tractor 240 - 300 cm
- Working width: 2400-3000 mm
- Swing angle: 7º on each side
- Weight: 630-665 kg
€4,387.59
Regular price
€4,717.84
Price
excl. VAT
€5,308.99 VAT incl.
€5,308.99 VAT incl.
- -4%
-4%
Tilting box for tractor Giemme TP 100 - 200 cm
- Weight : 80 - 180 kg
- Power : 15 - 90 HP
- Country of manufacture : Italy
€793.09
Regular price
€826.14
Price
excl. VAT
€959.64 VAT incl.
€959.64 VAT incl.
- -7%
-7%
Mechanical polidozer for Zeppelin tractor ESCZTL Z 1800-2700 mm
- Working width: 1800 - 2700 mm
- Thickness: 6 mm reinforcements / 5 mm blade.
- Weight: 290 - 350 kg
€1,895.40
Regular price
€2,038.06
Price
excl. VAT
€2,293.43 VAT incl.
€2,293.43 VAT incl.
- -4%
-4%
Leveling blade for Garto tractor CN 130-160 cm
- Weight: 55 kg / 65 kg
- Working width: 1300 mm / 1600 mm
€460.56
Regular price
€479.75
Price
excl. VAT
€557.28 VAT incl.
€557.28 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest