Manual rear box for Giemme tractor TBR 140 - 180 cm
- Weight : 150 - 210 kg
- Power : 20 - 70 HP
- Country of manufacture : Italy
€1,458.50 VAT incl.
Deleks products take about 15 to 20 days. |
The DELEKS LNS-C tractor snow plough is designed to remove snow from roads, parking lots or for businesses. Its robust structure allows not only to remove snow, but also as a leveling blade during the warmer months.
The blade is attached to the tractor with a category 1 3-point hitch and is compatible with tractors from 16/20/30 to 40/45/50 HP, the tractor does not need hydraulic outlets. However, this model can be equipped with the option of a hydraulic piston for right/left orientation (the tractor must have 2 hydraulic outlets).
It has 4 anti-shock springs to work with maximum safety, easy assembly and use and replaceable steel blade. The 3-point hitch can be replaced by a plate or a mini skid-steer loader support, this shovel is approved for public roads.
Model | LNS-160-C | LNS-180-C | LNS-200-C |
Weight | 113.0 kg | 123.0 kg | 150.0 kg |
Total height | 880.0 mm | 880.0 mm | 880.0 mm |
Tractor power | 16 - 40 hp | 20 - 45 hp | 30 - 50 hp |
Total depth | 620.0 mm | 50 - 90 hp | 60 - 90 hp |
Distance between bottom points | 690.0 - 800.0 mm | 690.0 - 800.0 mm | 690.0 - 800.0 mm |
Distance between 2 points and the ground | 300.0 mm | 300.0 mm | 11.81 in |
Oil pressure min./max | 110 - 150 bar | ||
Optimal oil flow | 18 - 22 l/min | 18 - 22 l/min | 18 - 22 l/min |
Mounting | 3-point hitch CAT 1 (19.0 - 22.0 mm) | ||
Inclination | 28° | ||
Float | +/- 2° | ||
Slat height | 525.0 mm | ||
Lateral reinforcements thickness | 8.0 mm | ||
Shock absorbers | 4 | ||
Slat | Steel or rubber | ||
Blade: height | 120.0 mm | ||
Slat: thickness | 14.0 mm | ||
Grinding: number | 1 | ||
Grinding: space between bolts | 200.0 mm | ||
Slat width (inclined) | 1330.0 mm | 1520.0 mm | 1890.0 mm |
Hydraulic hoses | (Optional) 2 x 1500.0 mm / connections 1.2" AGRI, WP 400 bar | ||
Slat width | 1516.0 mm | 1716.0 mm | 2116.0 mm |
Plate thickness | 4.0 mm | ||
ø piston/i | (Optional) 50.0 / 25.0 mm | ||
Packing dimensions | 152 x 80 x 80 cm | 172 x 80 x 80 x 80 cm | 212 x 80 x 80 x 80 cm |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References