Hydraulic Hammer BJR
- For mini excavators BJR
- Optimal performance and precise operation
€1,544.01 VAT incl.
The Mini Excavator BJR-10, with an operating weight of 1000 kg, is equipped with a Briggs & Stratton 499 cc engine providing a power of 7.6 kW (equivalent to 13.5 HP). With 3000 revolutions per minute and a maximum torque of 25 N.m at 2500 r/min, this mini excavator ensures efficient performance.
The mini-excavator BJR -10 stands out for its agility and versatility, reaching a maximum travel speed of 2.5 km/h and a rotational speed of 11 rpm. Equipped with a standard 40 cm bucket and an impressive maximum digging force of 11.5 kN, this machine is ideally suited to carry out excavation and grading tasks.
Thanks to its overall length of 2870 mm and full width of 985 mm, the mini excavator is highly maneuverable in tight spaces. In addition, its bulldozer blade can clean a depth of up to 170 mm and lift up to 240 mm above the ground, simplifying tasks on uneven surfaces.
Operating weight | 1000 kg |
Bucket capacity | 0.022 m³ |
Engine | Briggs Stratton |
Briggs Stratton Power | 7.6 kW / 13.5HP |
Koop Power | 7 kW / 9.5 HP |
Revolutions | 3000 r/min |
Maximum torque | 25 N.m / 2500 r/min |
Maximum travel speed | 2.5 km/h |
Rotation speed | 11 rpm |
Standard bucket | 40 cm |
Leveling capacity | 30° |
Maximum digging force | 7.2 KN |
Max. digging force of arm | 4.6KN |
Total length (transport) | 2870 mm |
Full width | 985 mm |
Total height without roof | 2030 mm |
Total height with roof | 2285 mm |
Bulldozer Maximum cleaning depth | 170 mm |
Bulldozer Maximum height above ground | 240 mm |
Ground pressure | 0,4 kgf/cm2 |
Hydraulic pump format | Gear pump |
Working pressure | 16 MPa |
Flow rate | 18 l/min |
Hydraulic oil tank capacity | 18 L |
Engine oil capacity | 1.65 L |
Fuel tank capacity | 5.5 L |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References