Hydraulic cutting bar Deleks HR-130 1300mm
- Cutting width: 1300 mm
- Number of blades: 17
- Cutting diameter: 25 mm
- Weight: 58 kg
€1,269.57 VAT incl.
Deleks products take about 15 to 30 days. |
The DELEKS FALCOW Hydraulic Tractor Hedge TrimmerHas a cutter bar for pruning trees and hedges with maximum diameter 2 - 3 cm, it can work on both sides and can be used at the front of the tractor.
It has a 3.5 M arm the hydraulic pump has a double hydraulic pump that allows it to move the arm and at the same time to cut double coupling to 3 points of category 1 - 2 which allows every cutting angle on both sides of the tractor to be efficient.
Can also be used at the front and rear of the tractor, without making any modifications to the machine, has an innovative system of wireless control which replaces the mechanical remote control with cables and sheaths. With this remote control supplied as standard, it will be possible to manage both the hydraulic pistons and the hedge trimmer bar.
Thus allowing it to be mounted on the rear or front of the tractor without having to worry about how to get the pipes from the distributor to the cab. Its wireless system is rainproof and does not need to be recharged, it has a robust but light chassis for optimal maneuverability even with medium-low power tractors.
Model | FALCO 130W | FALCO 160W | FALCO 180W |
Working width | 1300.0 mm | 1600.0 mm | 1800.0 mm |
Overall width | 1400.0 mm (closed) | 1400.0 mm (closed) | 1400.0 mm (closed) |
Tractor power | 20-60 HP | 20-60 HP | 20-60 HP |
Weight | 255.0 kg | 260.0 kg | 265.0 kg |
Number of blades | 17 | 21 | 24 |
Total height | 2300.0 mm | ||
3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm | ||
Distance between the lower points | 650.0 - 940.0 mm | ||
Max. cutting diameter | 20.0-30.0 mm | ||
Total length | 400.0 mm | ||
Transmission type | Hydraulics | ||
Transmission: PTO | 540 r/min | ||
Transmission: direction of rotation | Schedule | ||
Oil pressure min/max | 120 - 150 bar | ||
Optimal oil flow | 18 - 22 l/min | ||
Hydraulic hoses | WP 400 Bar | ||
Packing dimensions | 220 x 100 x 100 cm | 240 x 100 x 100 cm | 260 x 100 x 100 cm |
|
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References