Hydraulic cutting bar Deleks HR-130 1300mm
- Cutting width: 1300 mm
- Number of blades: 17
- Cutting diameter: 25 mm
- Weight: 58 kg
€1,231.48 VAT incl.
Deleks products take about 15 to 25 days. |
DELEKS FALCO-S Hydraulic Hedge Trimmer PTO DELEKS FALCO-SHas a cutter bar for trimming grass and hedges with maximum diameter 1 - 2 cm. It works on both sides of the tractor and can be used at the front. It has a reversible chassis with 3 hydraulic movements.
It has a 4-lever remote control and flexible hoses for a better handling of the machine, it also has an independent hydraulic system made in Italy, its cutter bar has 17 - 24 teeth (depending on the selected model) of effective work and has a 3-point linkage cat. 1 - 2 standards.
Model | FALCO 130S | FALCO 160S | FALCO 180S |
Working width | 1300.0 mm | 1600.0 mm | 1800.0 mm |
Overall width | 1400.0 mm (closed) | 1400.0 mm (closed) | 1400.0 mm (closed) |
Tractor power | 20-60 HP | 20-60 HP | 20-60 HP |
Weight | 265.0 kg | 275.0 kg | 285.0 kg |
Number of blades | 17 | 21 | 24 |
Total height | 2300.0 mm | ||
3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm | ||
Distance between the lower points | 650.0 - 940.0 mm | ||
Max. cutting diameter | 10.0-20.0 mm | 20.0-30.0 mm | 10.0-20.0 mm |
Total length | 400.0 mm | ||
Transmission type | Hydraulics | ||
Transmission: PTO | 540 r/min | ||
Transmission: direction of rotation | Schedule | ||
Oil pressure min/max | 120 - 150 bar | ||
Optimal oil flow | 18 - 22 l/min | ||
Hydraulic hoses | WP 400 Bar | ||
Packing dimensions | 150 x 80 x 200 cm | 150 x 80 x 200 cm | 150 x 80 x 200 cm |
|
![]() |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.