Cement mixer Anova-Total TD614006
The cement mixer Anova -Total TD614006 has a voltage of 220 - 240 V and a frequency of 50 / 60 hz. The model provides us with a total power of 1400 W. It has 2 speeds.
The mixer model TD614006 of Anova-Total, offers revolutions of 180-480 / 300-750 rpm. In addition, it includes a M14 mixing rod and has a total weight of only 5 kg. It also has a no-load speed of 0-500/0-800min-1.
Features
| Power |
1400 W |
| Voltage |
220 - 240 V |
| Frequency |
50 / 60 hz |
| Speeds |
2 |
| Revolutions |
180-480 / 300-750 rpm |
| Mixing rod |
M14 |
| No-load speed |
0-500/0-800min-1 |
| Weight |
5 kg |
| Including |
1 mixing rod |
Use and care of power tools
Do not force the tool. Use the correct power tool for each use.
Do not use the power tool if its power switch does not work. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool to avoid accidentally starting the tool.
Use the power tool, accessories and bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations other than those intended could result in a hazardous situation.
Store power tools out of the reach of children and do not allow persons unfamiliar with the tool to use it.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
