Electrode holder clamp 35/50 200 A Solter
- Electrode holder clamp kit. Length 3m, 25mm copper section cable, dinse 35-50mm connector and 200 Amp electrode holder clamp.
€53.69 VAT incl.
Deleks products take about 15 to 20 days. |
The DELEKS LNS-J Vehicle Snow Shovel is designed and approved for road use, is adapted for most ATVs and 4x4s, for mounting it is necessary to install a chassis under the vehicle (not included). This model has a replaceable steel sheet.
Can be equipped with Vulkollan rubber sheeting (on request), the vehicle must be equipped with: 4 wheel drive, minimum 60 amp alternator, minimum 70 amp battery, it is CE compliant, has snow tires, power steering, and comes with a 2-year warranty.
It has a 12 volt hydraulic pump bucher Hydraulics, with oil reservoir, 2 solenoid valves, 2 pistons for right/left orientation. Has 4 - 6 anti-shock springs to work with maximum safety, it is easy to assemble and use.
Its replaceable steel blade. On request, we sell a Vulkollan rubber sheet, also with a parking foot, its attachment plate can be replaced by a 3-point hitch or charger plate.
Model | LNS-130-J | LNS-150-J | LNS-170-J |
Weight | 128.0 kg | 138.0 kg | 146.0 kg |
Total height | 880.0 mm | 880.0 mm | 1080.0 mm |
Total depth | 620.0 mm | 620.0 mm | 760.0 mm |
Inclination | 28° | ||
Float | +/- 2° | ||
Slat height | 525.0 mm | ||
Thickness of lateral reinforcements | 8.0 mm | ||
Shock absorbers | 4 | 4 | 4 |
Lama | Steel or rubber | ||
Lama: height | 120.0 mm | ||
Slat: thickness | 14.0 mm | ||
Sharpening: number | 1 | ||
Sharpening: bolt spacing | 200.0 mm | ||
Side lights | √ | ||
Side skids | x | ||
Plate dimensions | View images | ||
Slat width (inclined) | JEEP, PICK-UP, VAN, SUV, SUV | ||
Plate | Universal coupling | ||
Slat width | 1316.0 mm | 1516 mm | 1716.0 mm |
Plate thickness | 4.0 mm | ||
ø piston/i | 50.0 / 25.0 mm | ||
Packing dimensions | 152 x 80 x 80 cm | 172 x 80 x 80 cm | 212 x 80 x 80 cm |
Model | LNS-190-M | LNS-210-M |
Weight | 160.0 kg | 180.0 kg |
Total height | 1080.0 mm | 1080.0 mm |
Total depth | 760.0 mm | 760.0 mm |
Inclination | 28° | |
Float | +/- 2° | |
Slat height | 525.0 mm | |
Thickness of lateral reinforcements | 8.0 mm | |
Shock absorbers | 4 | 6 |
Lama | Steel or rubber | |
Lama: height | 120.0 mm | |
Slat: thickness | 14.0 mm | |
Sharpening: number | 1 | |
Sharpening: bolt spacing | 200.0 mm | |
Side lights | √ | |
Side skids | x | |
Plate dimensions | View images | |
Slat width (inclined) | JEEP, PICK-UP, VAN, SUV, SUV | |
Plate | Universal coupling | |
Slat width | 1916.0 mm | 2116.0 mm |
Plate thickness | 4.0 mm | |
ø piston/i | (Optional) 50.0 / 25.0 mm | |
Packing dimensions | 192 x 80 x 80 cm | 212 x 80 x 80 cm |
Data sheet
Specific References